PUMP PERFORMANCE

BETTER PERFORMANCE

HIGH
EFFICIENCY

1. Engineering Design

2. 5-Axis CNC Milling.

3. Smooth Vane Surfaces.

4. Self Lubricating Surfaces.

5. Less leakage through Rings.

6. No Casting Imperfections.

LITTLE OR NO CORROSION
(Non Corrosive in Salt and Brackish Water -- Good Chemical Resistance)

1. Phenolic / Epoxy Resin Matrix and Graphite Fibers are not affected by salt water.
2. SimsiteŽ  is Corrosion Resistant to Most Acid or Alkaline Solutions.

NO ELECTROLYSIS

1. The Graphite Used in SimsiteŽ is Non Conductive.
2. The more SimsiteŽ in the Pump the Lower the Electrolysis.

LOWER AMPS

1. Light Weight. (SimsiteŽ Specific Gravity is 1/6 the Weight of Bronze and Stainless and 1/3 the Weight Titanium)
2. Always Balanced.

LOWER AMPS

1. Light Weight. (SimsiteŽ Specific Gravity is 1/6 the Weight of Bronze, and Stainless Steel and 1/3 the Weight of Titanium.)
2. Engineering Design. (High Efficiency)
3. Always Balanced.

REDUCED HYDRAULIC FORCE

1. Precision Machining - - All the vanes are within .002 inches of each other. All exit ports are equally spaced.
2. There are No Casting Imperfections.

MECHANICAL BALANCE

ALWAYS BALANCED

1. Precision Machining – All SimsiteŽ Impellers are Machined on a 5-axis CNC Machining Center from a Center Reference Point for Symmetry.
2. SimsiteŽ Impellers, Rings, & Guide Bearings will not   Corrode in Salt Water and therefore will not go into an imbalance.

LIGHT WEIGHT

1. SimsiteŽ Specific Gravity is approximately 1/6 the Weight of Bronze, 1/6 the weight of Stainless Steel and 1/3 the Weight of Titanium.

HIGH EFFICIENCY

1. Smoother Surfaces.
2. Precision Machining.
3. No Casting Imperfections.
4. Minimum Casing Ring Clearances.
5. Engineering Design.

REDUCES CAVITATION

1. SimsiteŽ Impellers are Designed to Reduce Cavitation.
2. SimsiteŽ Composite is good against the effects of Cavitation.

LOWER NPSHR

1. Engineering Design -- The SimsiteŽ Impeller Vanes are Designed to Reduce the NPSHR.
2. Engineering Expertise.